3.5 Inch SAS SATA Drive Caddy Tray for DELL PowerEdge 2950

Description:

• This is a great server disk caddy tray for Dell PowerEdge server
• Comes with 4 screws
• Accepts 3.5 inch SATA / SAS HDD
• Compatible Part Numbers: F9541, NF467, H9122, G9146, MF666
• Works With:
  • PowerEdge 1900
  • PowerEdge 1950
  • PowerEdge 2900
  • PowerEdge 2950
  • PowerEdge 2970
  • PowerEdge 840
  • PowerEdge 6900
  • PowerEdge 6950
  • PowerEdge R300
  • PowerEdge R900
  • PowerEdge R905
  • PowerEdge T300
  • PowerEdge T605
  • PowerEdge 1900
  • PowerEdge 1900
  • PowerVault MD1000
  • PowerVault MD1120
  • PowerVault MD3000
  • PowerVault NF100
  • PowerVault NF500
  • PowerVault NF600
• Note:
  • The above list is not complete. Check your own Dell server to see if the tray looks like the picture or uses on of the dell part number listed above
  • Interposer is not required to use this tray with a SATA hard drive for PowerEdge servers. Just mount the SATA drive the same way as SAS drives
  • Some of the above servers or storage systems can be configured to use either 3.5" drives or 2.5" drives. This tray is for 3.5" drives only. If your server uses 2.5" drives, obviously this is the wrong tray for you and you should look for Dell KF248 2.5" tray

Package Includes:

• 1 x caddy tray
• 4 x screws

Keywords: Hard drive caddy, DELL PowerEdge 2950