This 1x 4 HDMI splitter can distribute 1 HDMI source to 4 HDMI displays simultaneously. This HDMI Distribution Amplifier offers HD video solution for super market; shopping Mall; HDTV, STB, DVD and projector factory; data control center; information distribution; conference room presentation; education and training, corporation show room, luxurious house, etc.
- HDMI 1.3 version 4 Ports (1 x 4) Splitter / Distribution Amplifier
- Splits an HDMI signal (digital audio and video up to 1080p) to four displays
- Input Video Signal: 0.5 -1.0 volts p-p
- Input DDC Signal: 5 volts p-p (TTL)
- Max. Single Link Range: 1920X1200, 1080P
- HDMI Resolutions: 480i / 576i / 480p / 576p / 720p / 1080i / 1080P
- DVI Resolutions: 480p / 576i / 576p / 720p / 1080i / 1080p
- Bandwidth: Up to 225MHz
- EDID Duration: 6 seconds
- Input Power Supply: 100 - 240V AC 50/60Hz
- Output Power Supply: DC 5V, 2A
- Size (L x W x H): Approx. 14.6 x 7 x 2.4cm / 5.7 x 2.76 x 0.94 inch
- NOTE: Being a member of HDCP Protocol, our products have been approved by HDCP Protocol.
Connection and Operation:
- Connect the HDMI input source and output devices into the HDMI Splitter
- Connect the DC 5V power supply into the splitter. Please make sure no other voltage power supply should be connected. Power supply with higher voltage may damage the splitter.
- Turn on the power switch
- When all input and outputs are connected and turned on, the corresponding LED will light.
- Attention: Insert and Extract cable gently
- 1 x HDMI splitter
- 1 x UK pug adapter
- 1 x User manual