The board is a microcontroller board based on the ATmega328. It has 14 digital input / output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
|Application||For HW SW engineers development tools|
|DC I/O current||40mA|
|SRAM Static storage capacity||1KB|
|DC Current for 3.3V Pin||150 mA|
|Support ISP download||Yes|
- 1 x FUNduino uno board
1 x USB cable (45cm)
Note: Since the size above is measured by hand, the size of the actual item you received could be slightly different from the size above. Meanwhile, please be reminded that due to lighting effects, monitor's brightness / contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item.