The FT232R USB to serial module used a new design which the USB adapter became into the serial port. You can choose 3.3V or 5V TTL level by plugging the jumper cap. The product had passed the test that 10W bytes were received by the spontaneous at the factory.
Using best FT232RL chip with USB2.0. USB power supply with overcurrent protection. Using 500MA resettable fuse to protect your computers and devices ! More stable performance ! !
- Condition: 100%Brand New
- Asingle-chip solution
- No need peripherals
- Bulid-in the crystal,the USB matching resistor, place the product information EEPROM
- FT232RL chip
- Leads to the FT232RL chip signal port, TTL / CMOS level
- RXD / TXD transceiver communication indicator
- USB power supply, optional 5V or 3.3V interface level (if you need other level, can be directly in the VCC and GND pin target voltage)
- Color: Blue
- Material: PCB
- Size:Approx. 4.2 x 1.8 x 1 cm / 1.7 x 0.7 x 0.4 inch
- 1 x FT232R USB to serial module
Note: Since the size above is measured by hand, the size of the actual item you received could be slightly different from the size above. Meanwhile, please be reminded that due to lighting effects, monitor's brightness / contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item.
Buyers Who Bought This Item Also Bought