Home > Electronics > DIY Parts & Tools > Wireless 3 Way LCD Touch Wall Light Switch w/ Remote Control
Wireless 3 Way LCD Touch Wall Light Switch w/ Remote Control

Wireless 3 Way LCD Touch Wall Light Switch w/ Remote Control

Item ID: 14001971

Sale Price:US$23.74

Total Price:
Quantity: Availability: In StockPrice Match
Buy More... Get Lower Price!
Quantity 1 2-4 5-9 10 or more
Unit Price US$23.74 US$21.97 US$20.73 US$19.63
Product Details

Description:

3-way LCD touch sensitive wall switch and 2pcs of remote control

Wireless remote control and LCD touch sensitive control

Easy to install and control lamps

Wireless signal works through walls, floors and doors for truly remote control

One remote control can control one or several wall switches simultaneously

Wall Switch

Working Voltage: AC 100 - 250V (50 Hz)

Channel: 3 CH

Decode: Learning code

Size: 3.4 x 3.4 x 1.2 inch / 8.6 x 8.6 x 3 cm

Remote Control

Power Supply: 1x 23A 12V Alkaline battery (not included)

Working Range: 50m / 164ft (theoretically)

Buttons: 4 control buttons

Encode: Fixed code by soldering

Size: 2.3 x 1.5 inch / 5.8 x 3.8 cm

Setup for Remote Control

1: One key to control lights of one way. Such as

Press button A, turn on the lamp 1; Press button A again, turn off the lamp 1

Press button B, turn on the lamp 2; Press button B again, turn off the lamp 2

2: One key to control lights of three ways. Such as

Press button C, turn all lights on (button C turns lights on only)

Press button D, turn all lights off (button D turns lights off only)

Detailed Operations for R/C Setup

For Setup 1: Touch and hold LCD of switch to turn on the lamp until the indicator LED of switch flashes once, press the button of remote control (for example button A). The learning of button A is successful. So does B C D buttons

For Setup 2:

To set ON command for one button: Under the state of lamp 1 on, lamp 2, 3 off, touch and hold lamp 1 LCD of switch to turn off the lamp 1 until the indicator LED of switch flashes twice, press the button of remote control (for example C button), the indicator LED flashes again. Press C button can turn on lamp 1,2,3 simultaneously, press again can not turn off lamp 1,2,3. The learning of C button is successful.

To set OFF command for one button: Under the state of lamp 1 on, lamp 2, 3 off, touch and hold lamp 1 LCD of switch to turn off the lamp 1 until the indicator LED of switch flashes once, press the button of remote control (for example D button), the indicator LED flashes again. To turn on lamp 1,2,3 by hand, press D button can turn off lamp 1,2,3 simultaneously, press again can not turn on lamp 1,2,3. The learning of D button is successful.

Method of Deleting the Codes of Remote Controls: Press and hold LCD of switch until the indicator LED flashes three times, and then release. All preset codes will be successfully deleted.


Package Includes:

1 x Wall switch

2 x Remote control

2 x Screw


Note:

Please take note that singleway resistive load power is 200W and single way inductive load power is 80W.The load power can not exceed the maximum load powermentioned above. Each way can use less than 4 pieces of 20W energy-saving lamps or lamp beads, or not more than 6 pieces of 9W energy-saving lamps