Home > Electronics > DIY Parts & Tools > LED Digital Display Cycle Time Delay Module 12V
LED Digital Display Cycle Time Delay Module 12V

LED Digital Display Cycle Time Delay Module 12V

Item ID: 14007844

Sale Price:US$8.14

Total Price:
Quantity: Availability: In StockPrice Match
Buy More... Get Lower Price!
Quantity 1 2-4 5-9 10 or more
Unit Price US$8.14 US$7.53 US$7.11 US$6.73
Product Details

Description:

  • Input Voltage: 12V
  • Current: equal to or greater than 100mA
  • Load 250V 10A AC or DC 30V 10A
  • Power consumption: 0.5W
  • Working temperature: From -10 to +50℃
  • Delay range: 0-999 seconds
  • Size: 55.8mm x 34mm

Adjustment method:

1. The initial power on, the system defaults to 10 seconds total, 10 second break time.

2. Delay time adjustment method:

  • Left button: digital selection, single digit-decimal-hundreds-digit circulation.

  • Right button: the digital value adjustment, 0-1-2-...-9-0 loop.

  • Sets the default time range: 1-999 (seconds)

  • Relay closing time adjustment: adjust the c with NO short cycle time, module snap-on light is on at this time. After power on, long press the right button, until the single digit tube starts (the right one, that is, time value of a seat) starts to Flash. At this point press the right key, you can select adjust set time single digit, ten or a hundred, selected digit tube led will be blinking; press the left button, you can adjust the value of the current flash, every time you press the right button, flicker value plus 1, and cycling in 0-1-2-...-9-0 order. After you adjust the closed, about 3-5 seconds, LED digital tube stops flashing, this module will automatically record the set delay time. Relay disconnect time adjustment: regulating public side and often closed-end short time, module snap-on light is off at this time. 

  • Relay breaking time adjustment: adjust the c with NC short cycle time, module snap-on light is off at this time. After the power on, press the left button until single digit tube begins (the right one, that is, time value of a seat) starts to Flash. At this point press the right key, you can select adjust set time single digit, ten or a hundred, selected digit tube led will be blinking; press the left button, you can adjust the value of the current flash, every time you press the left button, flicker value plus 1, and cycling in 0-1-2-...-9-0 order. Adjusted close when you are finished, wait for the led stops flashing and the module will record the new values.

3. Back to Electricity and starts according to the set value function

Package Includes:

  • 1 x Delay Time Module
Document Download